Basic Info.
Model NO.
from DN40 to DN2000
Certificate
Material Certificate 3.1
Application
Potable Water Irrigation etc
Quality Control
100% Inspection and ISO9001 Quality Control System
Transport Package
Sea Worthy Plywood Box
Specification
DN40 to DN2000
Product Description
Product Application
Our dismantling joint are three flanged fittings that accommodate up to 50mm(2") longitudinal adjustment and can be locked at the required length with the tie bars supplied.When you loose the tie bars,you can move the long body into or out of the short body to adjust the length to what you need.The max adjustable length of our dismantling joint is 50mm.Not only does this system allow for fast,easy maintenance of valves,pumps or meters,it simplifies future pipe work modifications and reduces downtime when changes need to be made. The body material can be ductile iron ,carbon steel or stainless steel.Gasket material is EPDM or NBR.Tie bars can be gal.steel ,hot dip gal.steel,Stainless steel or as per client request.
| Sr.No. | Name | Material |
| 1 | Long body | Ductile Iron |
| 2 | Short body | Ductile Iron |
| 3 | Retainer | Ductile Iron |
| 4 | Gasket | EPDM/NBR |
| 5 | Tie rods | CS/SS |
Our main dismantling joint type
Manual for dismantling joint
Installation
The installation will be made using the tie rods.Tie rods must extend until the flange of the valve or of the piece connected to the dismantling joint.Bolts used for the assembly must have the same metric and quantity of DN that flanges used.Its length will have to be sufficient so that the ends of the nuts and bolts exceed at least of 1centimeter of the external bolts.
Installation process:
Step 1:It is advised to check the length of final assembly fo the dismantling joint,so that it is closest to its nomial measurement,to facilitate the seembly and the disassembling of this one.
Step2:The correct position for the assembly of the dismantling joint will be,water downstream from the female part and water upstream of the male part.
Note:for pipes with a water direction in the two sides(pipes of discharge),the dismantling joint will make the sealing in the two directions when the flow of water is contrary to the assembly indicated above,the pressure loss will be superior.
Step3: To unscrew the bolts which tighten the intermediate flange as well as the internal bolts of the flanges of connection,to check that the male/female sliding is slowly made in order to avoid any stretching and /or scratch between the fixed and mobile parts(pyramidal joint,male and female).
Step 4: To place the dismantling joint in its final position,making sure that the position of the holes of the flange coincides with the position of the holes of the pieces to connect.
Note:The maximum tolerable angular deflections for the flanges(parallelism) of pieces to be connected will not exceed the following value of 0.25°X1000/DN considering only the connection which is carried out with the tie rods does not enable a greater deflection than that caused by the tie rods with the holes of the flanges.
Please more details,please contact us .
Our Process for dismantling joint production is as below
We Produce our product strictly according to ISO9001 quality control system,and we have WRAS ,DVGW, ,ISO14001 certificate for powder,and WRAS certificate for EPDM gasket.Photos as below are for your reference
our Package is sea worthy polywood box or pallet,photos are as below
We control our quality according to ISO9001 ,photos as below is for your reference
Company information
Judberd ductile iron pipe joint(dismantling joint,coupling,flange adaptor,quick flange adaptor,saddle,restrained flange adaptor,repair clamp etc) are manufactured using advanced equipment in a outstanding quality level using the finest materials available.Designed by a first class team of ductile iron pipe fittings specialists with over 20 years experience in the water industry.Manufacturing facilities are certified to ISO9001-2000 and are company owned and operated.
welcome your enquiry ,we will do our best to support.
Address:
No. 139 Wuxing Road, Shibei District, Qingdao City, Shandong Province, China
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Our company offers ductile iron pipe fitting, ductile iron pipe joint(dismantling joint, coupling, flange adaptor, saddle, quick flange adaptor, restrained flange adaptor for PE pipe, repair clamp etc) and ductile iron valves. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}